USRobotics manual Robotics Wireless MAXg USB Adapter Installation, Prepare for installation

U.S. Robotics Wireless MAXg USB Adapter Installation

Package Contents:

USR5421 Wireless MAXg USB Adapter Installation CD-ROM which includes User Guide

Quick Installation Guide

Prepare for installation

You must have administrator rights on your computer in order to install this product.

You will need to install this Installation CD-ROM on all the PCs on which you plan to install Wireless MAXg USB Adapters.

You must be using Windows XP (Service Pack 1 or higher) or 2000 (Service Pack 4 or higher).

For the most updated information, visit: http://www.usr.com/support

You can also refer to the User Guide on the U.S. Robotics Installation CD-ROM for more detailed information.

If you are installing only a Wireless MAXg USB Adapter, go to the section entitled Installing JUST the Wireless MAXg USB Adapter.

Installing BOTH a Wireless MAXg Router and the Wireless MAXg USB Adapter

Step One: Connect the Wireless MAXg Router

A.Turn off your computer and your cable or DSL modem. Disconnect the modem’s Ethernet cable from your com- puter and connect it to the WAN port of the Wireless MAXg Router.

B.Connect the supplied Ethernet cable to the Network Interface Card of your computer and to one of the LAN ports of the Wireless MAXg Router.

C.Connect the antenna to the Wireless MAXg Router.

D.Connect the power adapter to the Wireless MAXg Router and to a standard wall power out- let. Turn on your computer.

1