USRobotics manual Installing Just the Wireless MAXg USB Adapter

Installing JUST the Wireless MAXg USB Adapter

Step One: Install the Wireless MAXg USB Adapter and drivers

A.Insert the USB Adapter Installation CD-ROM into the CD-ROM drive of the computer you are installing the USB Adapter in. The Installation CD Graphical User Interface (GUI) will appear on your screen. If prompted, select your preferred language.

Note: If your CD-ROM does not automatically launch, click Windows Start, Run, type D:\setup (if your CD-ROM drive uses a different letter, type that letter in place of “D”), and click OK.

B.Click Installation.

C.Follow the on-screen instructions.

D.When prompted, locate an available USB slot and fully insert the Wireless MAXg USB Adapter.

E. When prompted, click Restart to restart your computer.

Note: You may see a screen which says “Digital Signature Not Found” or “Windows Logo testing”. Click Yes or Continue Anyway. U.S. Robotics has thoroughly tested this driver in conjunction with the supported hardware and has verified compatibility with Windows XP and 2000. Because U.S. Robotics wants its customers to take full advantage of the network card’s functionality, it has made the drivers available.

5