UTStarcom VM8915 manual Battery Usage, Battery Removal

BATTERY USAGE

CBATTERY INSTALLATION

H

11 u Place the battery on the back of the handset and slide into place. v Push the battery down until it locks into place.

BATTERYREMOVAL

1u Pull down the release latch, lift up the battery and v remove the battery from the handset.

If the battery is not correctly placed in the compartment, the handset will not turn on and/or the battery may detach during use.

BATTERY USAGE

BATTERY CHARGING	C
	H
POWER CONNECTION	1

1Plug the AC Charger into a standard outlet.

2Plug the other end of the AC Charger into the bottom of your phone. The battery must be installed onto the phone.

• When you charge the battery with the phone power off, you will see a charging status screen. You cannot operate the phone until it is powered on.

•The battery is not charged at the time of purchase.

•Fully charge the battery before use.

•It is more efficient to charge the battery with the handset powered off.

•The battery must be connected to the phone in order to charge it.

•Battery operating time gradually decreases over time.

•If the battery fails to perform normally, you may need to replace the battery.

10 11