General Items Changing fuses | UVPS 81-0112-01 Rev C manual

UV CROSSLINKERS

UVP

E.General Items Changing fuses

The fuses are located on the back panel and are marked with a self-adhesive sticker.

1.Turn fuse cap 15 degrees anti-clockwise.

2.Pull fuse and cap from the holder.

3.Pull fuse from the cap.

4.Replace the fuse.

5.Replace fuse cap and fuse into holder and turn 15 degrees clockwise.

Changing plastic feet

The feet are fitted to the bottom of the cabinet. They are removed by unscrewing the screw mounted inside each foot.

- 18 -

Image 20

UVPS 81-0112-01 Rev C manual General Items Changing fuses, Changing plastic feet

Contents

Ultraviolet Crosslinkers Contents Introduction Important Safety InformationDescription and Specifications Features ElectricalCL-1000 Shortwave Crosslinker CL-1000L Longwave Crosslinker Operation UV Crosslinkers UVP UV Crosslinkers UVP Applications MAINTENANCE, Care and Cleaning of the Crosslinker UV Wavelength Calibration Procedure Changing the UV Wavelength UV Crosslinkers UVP Crosslinker Calibration Procedure Equipment necessary Voltage Range for U4 Range for U5 Replacement Parts and Servicing Procedures Operations with TOP Cover Removed Operations With Top Cover Removed Removal of top cover General Servicing ProceduresReplacement of tube holders Replacement of starters Replacement of starter holder Replacement of main switch Replacement of fuse holdersReplacement of main connector Replacement of membrane panel Replacement of UV sensorReplacement of PCB Replacement of reflector General Items Changing fuses Changing plastic feet Schematic Wiring Diagram Corporate Headquarters UVP, Inc