UV CROSSLINKERS | UVP |
6.MAINTENANCE, CARE AND CLEANING OF THE CROSSLINKER
The UVP UV Crosslinker is built to provide you with
NOTE: ALWAYS UNPLUG UNIT FROM ELECTRICAL SUPPLY BEFORE CLEANING OR DRYING.
1.Wipe ANY water from inside and outside the unit with a soft cloth or sponge.
2.Use soap and water with a soft cloth or sponge to clean the unit.
3.Do not allow chemicals to remain on unit surfaces.
4.Never clean unit with abrasive pads or cleaners.
5.Never clean unit with acetone or chloroform.
6.Clean the UV sensor regularly with a soft cloth and alcohol.
UVP offers technical support for all of its products. If you have any questions about product use, operation or repair, please contact UVP Customer Service at the following numbers:
Corporate Headquarters: UVP, Inc.
2066 W. 11th Street,
Upland, CA 91786
TOLL FREE USA (800)
FAX: (909)
European Operations:
Unit 1, Trinity Hall Estate
Nuffield Road
Cambridge CB4 1TG United Kingdom
PHONE: +44(0)1223 420022
FAX: +44(0)1223 420561
NOTE: A Returned Goods Authorization (RGA) number must be obtained before returning any item to UVP.
- 7 -
