5. Installation:
NexStar 3 External 3.5” HDD Enclosure:
5.1. Hardware Installation:
Preparing the hard drive:
(1)Set the hard drive jumpers to MASTER or SINGLE DRIVE ONLY. Please refer to the documentation included with your hard drive for information on how to accomplish this.
Preparing the NexStar 3:
(1)Remove the side of the NexStar 3 with the power and USB connection ports. If it has previously been screwed in place, remove the screws first.
(2)Carefully slide out the side approximately 3 inches. ( pic
(3)Unplug the red and white cable for the LED.
(4)Slide out the rest of the side.
( pic
Installation
6
