Velodyne Acoustics Digital Drive Appendix C What’s New in release, Feature, Description

Appendix C: What’s New in release 2.0

Your Digital Drive subwoofer has version 2.0 of the digital drive room management software installed. Following is a description of the new features for version 2.0.

Feature	Description
Auto-EQ	New option on graph screen. When set to AUTO,
	this option resets the EQs to default third-octave
	frequencies (20, 25, 32, 40, 50, 63, 80, 100 Hz),
	and adjusts +/- 1 dB max each sweep. Can be
	done on SETUP (affects all presets) or for
	an individual preset.
Self-EQ	Allows EQing without video or EQ out hookup. On
	the main screen, when 3-2-1 is pressed on the
	remote, the DD automatically emits 25 sweep
	tones. If the microphone is connected, the unit self-
	EQs. Note that this only affects the low frequency
	EQ – it does not affect phase, crossovers, or
	other settings.
Individual EQs per preset	Each preset can have its own independent EQ
	setup, or all can be affected through the SETUP
	selection. Also, EQ curves reflect the effect of ALL
	settings for each preset, e.g. crossovers, phase,
	etc. Previously, these settings only reflected the
	SETUP values.
Defeatable Low-Pass Crossover	The low-pass crossover can be completely shut off
	by pressing the reset button when the cursor is on
	the low-pass crossover in the settings screen.
Selectable default preset	New field on settings page – whatever preset is
	selected will be invoked at startup
Navigation using up, down, left,	For people that didn’t like the left-right only
right arrows and select.	navigation. Now users can use all four directional
	arrows to position the cursor, then press SELECT to
	activate the field for alteration. For users who liked
	the old navigation, simply press select and then use
	the left, right, up, and down buttons as before.

.w w w . v e l o d y n e . c o m Digital Drive User’s Manual

47