Venturer PVS7980 owner manual Trouble Shooting Guide, Symptom Cause and Remedy, Dvd

Trouble Shooting Guide

SYMPTOM	CAUSE (AND REMEDY)
No power.	• Ensure the car power adapter is connected.
	• Turn on the unit.
The remote does not	• Remove any obstacles between the remote and the unit.
function.	• Use the remote near the unit.
	• Point the remote at the remote sensor on the unit.
	• Replace the battery in the remote with new ones.

DVD

No sound or only a very low-level sound is heard.

No picture

•Make sure that you’ve selected DVD mode.

•The system is in pause mode. Press the PLAY button to return to normal play mode.

•Fast forward or fast reverse is performed. Press the PLAY button to return to normal play mode.

•Make sure the AUDIO / VIDEO output/input connections are correct.

•The DTS DVD cannot be decoded to have speaker output.

•This unit is too hot. Power off the unit for 30 minutes to cool down.

•The region number of the disc doesn’t match the region number of this unit.

The picture is not clear

Severe hum or noise is heard.

The disc does not play.

•Clean the disc.

•The disc is scratched.

•The plugs and jacks are dirty. Wipe them with a cloth slightly moistened with alcohol.

•Clean the disc.

•There is no disc inside (“No Disc” appears on the screen).

•Insert the disc correctly with the playback side facing frontward.

•Clean the disc.

•A non-NTSC disc has been inserted. The unit and disc region number are incompatible.

•Condensation may have formed inside the unit due to a sudden change in temperature. Wait about an hour for it to clear and try again.

Specifications and appearance are subject to change without notice.

E - 19

811-798191W012.indd 19 4/1/2008 5:01:00 PM