VeriFone Vx510 manual Install/Replace Msam Cards, MSAMs

TERMINAL SETUP

Install/Replace MSAM Cards

7Close the paper roll cover by gently pressing directly on the cover until it clicks shut, allowing a small amount of paper past the glue residue to extend outside the printer door. (see Figure 10).

CAUTION

To prevent the paper roll cover from damaging the print roller, always gently press down on the printer dust cover to close it.

Figure 10 Closing Paper Roll Cover

8Tear the paper off against the serrated metal strip in the printer.

For paper ordering information, refer to Accessories and Documentation.

Install/Replace MSAM Cards

When you first receive your Vx5xx/Vx6xx terminal, you may need to install one or more MSAM cards or you may need to replace old cards.

	CAUTION	Observe standard precautions when handling electrostatically sensitive devices.
		Electrostatic discharges can damage this equipment. VeriFone recommends
		using a grounded anti-static wrist strap.
To Install/Replace		1	Remove the power cord and/or battery (see Smart Battery) from the terminal.
	MSAMs	2	Place the terminal upside down on a soft, clean surface to protect the lens
			from scratches.

VX5XX/VX6XX INSTALLATION GUIDE 19