Verilux CW01 manual Instructions,CAREOperation& CLEANINGand Directions for Use, Getting Started

Instructions,CAREOperation& CLEANINGand Directions for Use

Getting Started

Before you use the ClearWave® Phototherapy System, you will need to install the battery (see page 21 - How to replace the battery) and fully charge the device. It takes approximately 12 hours to fully charge the battery for the first time.

Step 1

Step 1 Connect the power adapter to the Charging Stand and the adapter into a 110 VAC grounded electrical outlet.

Step 2

Step 2 Place the ClearWave Phototherapy System for Acne on the Charging Stand as shown.

Step 3 The battery life indicator lights will provide information to you on the status while charging.

Step 3

Step 4

Step 4 When all 3 battery indicator lights are illuminated, the battery is fully charged and the device is ready for use. Once fully charged, the indicator lights will illuminate for 3 minutes, and then turn off. 

16