Controls and Status Information Indicators
Controls
a.Power Button
b.Head Latch Buttons
c.Adapter Input Port
Status Indicators
d.Information Display
e.Battery Life Indicator Lights
f.Interchangeable Head Life Indicator Lights
Information Display Indicators
b.
a.
d.
e.
f.
c.
Display | Mode | Explanation |
| Reference |
Number | Operating | Time remaining on current care cycle | Page 10 | |
Number | Idle | Number of care cycles remaining on head | Page 13 | |
0 | Idle | Interchangeable Head is exhausted | Page 15 | |
– – – |
| Interchangeable Head is not correctly attached | Page 13 or 15 | |
LO |
| Battery is low |
| Page 11 or 15 |
HP |
| Device is above the optimal operating temperature | Page 12 or 15 | |
CP |
| Device is below the optimal operating temperature | Page 12 or 15 | |
Interchangeable Head Life Indicator and Battery Life Indicator |
| |||
| Interchangeable Head Life Indicator Light | Battery Life Indicator Light | ||
3 lights | More than 75% of head life remaining | More than 75% of the battery is charged | ||
2 lights | 25% to 75% of head life is remaining | 25% to 75% of the battery is charged | ||
1 light | Less than 25% of head life is remaining | One more care cycle | ||
Flashing light |
| Head needs to be replaced | Battery needs to be charged | |
|
| Percentages are approximate |
|
How to Check the Status of Your Device
•Pressing the Power Button on the device body when the device is not operating will immediately place the device in Status Mode.
•The device will remain in Status Mode for half a second, then will automatically turn off.
•The Information Display will show the number of cycles remaining on the Interchangeable Head before replacement is required.
•The Interchangeable Head Life Indicator and the Battery Life Indicator Lights will display the respective status of the Interchangeable Head and battery charge level. (See status indications table above.)
•Placing the device in the Charging Stand will also activate Status Mode.
7
Job#: XXXXXXX Title: CWST2RB Manual
Date: 10/15/09 Version: