Adjusting the Heritage™ Floor Lamp
The Heritage Floor Lamp adjusts several ways:
1.To adjust lamp height – hold upper shaft (F) with one hand, loosen height adjusting collar. Raise or lower lamp arm (D) to desired height. Tighten collar (Fig. 5).
Note: Do not stand on cord or otherwise restrict its movement while raising or lowering the height of the lamp.
2.To rotate the lamp head right or left, loosen height adjusting collar, swing lamp arm to desired position. Tighten collar. Lamp arm rotates a full 360º (Fig. 6).
3.To adjust lamp head angle up or down – loosen swivel knob counterclockwise, place head at desired angle, tighten swivel knob to secure (Fig. 7).
4.To tilt lamp head toward you or away from you – simply move head to desired position (Fig. 8).
D
Height
adjusting
collar
F
Fig.5
Fig. 6
Swivel
Knob
Fig. 7
Fig. 8
7