BASIC OPERATION

ADJUSTING THE SCREEN

ZOOM ADJUSTMENT

1

Press the ZOOM button on the Top Control or the ZOOM ▲/▼

button on the Remote Control Unit. The message “Zoom” is

 

displayed.

2

Press the ZOOM ▲ button or the POINT UP button to make the

image larger, and press the ZOOM ▼ button or the POINT

DOWN button to make the image smaller.

Zoom

Message disappears after 4 seconds.

FOCUS ADJUSTMENT

1

Press the FOCUS button on the Top Control or the FOCUS ▲/▼

button on the Remote Control Unit. The message “Focus” is

 

displayed.

2

Adjust the focus of the image by pressing the FOCUS ▲/▼

button or the POINT UP/DOWN button(s) .

Focus

Message disappears after 4 seconds.

KEYSTONE ADJUSTMENT

If the projected picture has keystone distortion, correct the image with KEYSTONE adjustment.

1

Press the KEYSTONE button on the Remote Control Unit or

select Keystone on the SETTING menu. (Refer to page 36.)

The keystone dialog box appears.

2

Correct keystone distortion by pressing the POINT UP/DOWN

button(s) on the Top Control or on the Remote Control Unit.

Press the POINT UP button to reduce the upper part of the image, and press the POINT DOWN button to reduce the lower part.

The arrows are blue in no correction.

The arrow of direction being corrected turns light blue.

The arrow disappears at the maximum correction.

If you press the KEYSTONE button on the Remote Control Unit once more while the keystone dialog box is being displayed, the keystone adjustment will be set into no correction.

Reduce the upper width

Reduce the lower width with

with the POINT UP button.

the POINT DOWN button.

 

 

 

 

 

 

PICTURE FREEZE FUNCTION

Press the FREEZE button on the Remote Control Unit to freeze the picture on-screen. To cancel the FREEZE function, press the FREEZE button again or press any other button.

20

Page 20
Image 20
Canon LV-5200 Adjusting the Screen, Zoom Adjustment, Focus Adjustment, Keystone Adjustment, Picture Freeze Function