COMPUTER INPUT
Display area
Selects the area displayed with this projector. Select the resolution at the display area dialog box.
Display area H
Adjustment of the horizontal area displayed with this projector. Press the POINT LEFT/RIGHT button(s) to decrease/increase the value.
Display area V
Adjustment of the vertical area displayed with this projector. Press the POINT LEFT/RIGHT button(s) to decrease/increase the value.
Full screen
Press the POINT LEFT/RIGHT button(s) to turn the Full screen function “On” or “Off.” Set “On” to resize the image with 4 x 3 aspect ratio to fit the screen.
NOTE : Full screen cannot be selected after Display area, Display area H, and Display area V are adjusted.
3 Store
To store the adjustment parameters, move the red frame pointer to the Store icon and then press the SET button. Move the red arrow pointer to any of Mode 1 to 5 that you want to store and then press the SET button.
Mode free
To clear the adjustment parameters previously set, move the red frame pointer to the Mode free icon and then the SET button. Move the red arrow pointer to the Mode that you want to clear and then press the SET button.
Other icons operate as follows.
Reset
Reset all adjustment parameters on the adjustment dialog box to the previous figure.
Quit
Closes the PC ADJUST Menu.
NOTE
●Fine sync, Total dots, Display area (H/V) and Full screen cannot be adjusted when “1035i (HDTV)” or “1080i (HDTV)” is selected on PC SYSTEM Menu (P23).
Press the SET button at the Display area icon and the display area dialog box appears.
Display area
Press the POINT LEFT /RIGHT button(s) to adjust the value.
To store the adjustment data.
This Mode has parameters being stored.
Vacant Mode | Shows the values of “Total dots,” |
| “Horizontal,” “Vertical,” “Display |
| area H,” and “Display area V.” |
To clear the adjustment data.
Close this dialog box.
27
