Canon LV-5200 Remote Control Unit Batteries Installation, Before Operation, Operating Range

BEFORE OPERATION

ZOOM BUTTON		POWER
Used to adjust zoom.
(P20)		FOCUS VOLUME
	ZOOM

FOCUS BUTTON		D.ZOOM INPUT
	MUTE

Used to adjust focus. (P20)

MENU

MUTE BUTTON

Used to mute sound.(P21)

VOLUME BUTTON

Used to adjust volume. (P21)

D.ZOOM BUTTON

Used to select DIGITAL ZOOM +/– mode and resize image. (P30)

Operating Range

Point the Remote Control Unit toward the projector (Receiver Window) whenever pressing any button. Maximum operating range for the Remote Control Unit is about 16.4’ (5m) and 60° in front and rear of the projector.

16.4’ (5 m)

60°

KEYSTONE BUTTON

Used to correct keystone distortion. (P20, 36)

NO SHOW BUTTON

Used to turn the picture into black image. (P21)

LASER

KEYSTONE
NO SHOW	FREEZE
AUTO PC ADJ.	IMAGE
P-TIMER

FREEZE BUTTON

Used to freeze the picture. (P20)

IMAGE BUTTON

Used to select image level. (P28, 33)

60°

AUTO PC ADJ. BUTTON

Use to operate AUTO PC Adjustment function. (P25)

16.4’ (5 m)

REMOTE CONTROL UNIT BATTERIES INSTALLATION

1	Remove the battery
	compartment lid.

Press the lid down- ward and slide it.

2	Slide the batteries into	3	Replace the compartment
	the compartment.		lid.

Two AA size batteries For correct polarity (+ and –), be sure that the battery terminals are in contact with the pins in the compartment.

To insure safe operation, please observe the following precautions :

●Use (2) AA, UM3 or R06 type alkaline batteries.

●Replace both batteries at the same time.

●Do not use a new battery with a used battery.

●Avoid contact with water or liquid.

●Do not expose the Remote Control Unit to moisture, or heat.

●Do not drop the Remote Control Unit.

●If a battery has leaked on the Remote Control Unit, carefully wipe the case clean and install new batteries.

●Danger of explosion if battery is incorrectly replaced.

●Dispose of used batteries according to battery manufacturer's instructions and local rules.

15