APPENDIX
INDICATORS AND PROJECTOR CONDITION
Check the Indicators for the projector condition.
| Indicators |
| Projector Condition | |
LAMP | WARNING | READY | LAMP | |
REPLACE | TEMP. |
| ||
green | red |
| ||
yellow | red |
| ||
|
|
| ||
|
|
|
|
|
|
|
|
| The projector is OFF. (The AC Power Cord is unplugged.) |
|
|
|
|
|
✽ |
|
|
| The projector is READY to be turned on with the POWER |
|
|
| ||
|
|
|
| |
|
|
|
|
|
✽ |
|
|
| The projector is operating normally. |
|
|
|
|
|
|
|
|
| The temperature inside the projector is abnormally high. The |
|
|
|
| projector cannot be turned on. When the projector is cooled |
✽ |
|
|
| down enough and the temperature returns to normal, the |
|
|
| READY indicator lights green and the projector can be turned | |
|
|
|
| |
|
|
|
| on. (The WARNING TEMP. indicator keeps flashing.) Check |
|
|
|
| and clean the Air Filter. |
|
|
|
|
|
|
|
|
| The projector is cooled down enough and the temperature |
✽ |
|
|
| returns to normal. When turning on the projector, the WARN- |
|
|
| ING TEMP. indicator stops flashing. Check and clean the Air | |
|
|
|
| |
|
|
|
| Filter. |
|
|
|
|
|
✽ |
|
|
| The projector is being cooled down. It cannot be turned on until |
|
|
| the READY indicator lights green. | |
|
|
|
| |
|
|
|
|
|
|
|
|
| The projector detects an abnormal condition and cannot be |
|
|
|
| turned on. Unplug the AC Power Cord and plug it again to turn |
✽ |
|
|
| on the projector. If the projector is turned off again, disconnect |
|
|
| the AC Power Cord and contact the dealer or the service cen- | |
|
|
|
| |
|
|
|
| ter for service and checkup. Do not leave the projector on. It |
|
|
|
| may cause electric shock or fire hazard. |
✽
The projector is in the Power management mode.
• • • on | • • • flashing | • • • dim | • • • off |
✽When the life of the Projection Lamp draws to an end, the LAMP REPLACE indicator lights yellow. When this indicator lights yellow, replace the Projection Lamp with a new one promptly. Reset the Lamp Replace Counter after replacement of the lamp.
44
