Verilux VH04WW1 owner manual Operating Modes

6. CleanWave® Sanitizing Bagless Vacuum Operation — continued

6.6 Operating Modes

The Sanitizing Power Head has three operating modes:

i)Carpet,

ii)Sanitize,

iii)Both.

1.The Mode Indicator (A) will illuminate as one of three colors depending on the selected operating mode. The Sanitizing Power Head will be controlled as shown in Table 6-1, with the default power-up mode being Carpet Mode:

A

B

6.6

Table 6-1. CleanWave® Sanitizing Bagless Vacuum Operating Modes.

Operating Mode	Mode Indicator Color	Sanitizing Light	Powered Brush Roll	Suction	Function
Carpet	Red	Off	On	On	Powered Brush Roll
					& Suction
Sanitize	Blue	On	Off	On	Sanitizing & Suction
Both	Purple	On	On	On	Sanitizing, Powered Brush Roll & Suction
	Sanitize Mode (Blue)		Sanitize Mode (Off)
Surface Protection	Both Mode (Purple)	Off		On	Protects surfaces from overexposure to UV-C light
			Both Mode (On)
	(slow blinking)
Low Airflow	Red	Off	Off	On	Notice: Clean all filters and clear any blockages.
	(rapid blinking)				See Section 7.

2.Press the Mode Selector Switch (B) repeatedly to select the desired operating mode.

3.Proceed to vacuum your floors and surfaces just as you normally would. You can sanitize your floors and surfaces at the same time with little or no additional effort.

20