7. Care and Maintenance — continued
7.7 Cleaning and Replacing the Sanitizing Light Bulb |
|
The Sanitizing Light Bulb (A) is located on the bottom of the |
|
Sanitizing Power Head (B). | C |
| |
Note: Before cleaning or replacing the Sanitizing Light |
|
Bulb (A), disconnect Power Cord from electrical outlet. |
|
Also disconnect the Sanitizing Power Head (B) from the |
|
Telescoping Wand. |
|
1.Turn the Sanitizing Power Head (B) over (bottom up) with the Powered Brush Roll (C) closest to you.
2.With one hand, depress one Bulb Cover Release Tab (D) by pulling it toward the Powered Brush Roll (C).
3.With the other hand, grasp the Squeegee (E) near the Bulb Cover Release Tab (D) and gently lift the Bulb Cover (F).
4.Repeat Steps 2 and 3 for the other Bulb Cover Release Tab (D). The Bulb Cover (F) should now lift freely from the Sanitizing Power Head (B).
5.Wipe the Sanitizing Light Bulb (A) clean with a soft, dry cloth. Be careful not to leave fingerprints on the Sanitizing Light Bulb (A) or the Reflector.
D
E
C
7.7a
B
A
F
F
D
E
F
26