Call Block (*60)
Call Block provides you with the capability to block up to 12 external telephone numbers (within your regional calling area) from calling your number, preventing unwanted and nuisance calls. Once activated, any calls from these 12 numbers will be routed to an intercept message. For your protection, calls from outside of your regional calling area and
To access the Call Block feature:
Lift the handset and listen for dial tone.
Press 
* 
6 
0 .
Listen to the
GTD-5 switch type only:
If you are a member of a Hunt group, you must:
Lift the handset and listen for dial tone.
Press 
# 
6 
0 .
Listen to the
NOTES:
1.) Blocked calls will not be forwarded on any Call Forwarding arrangement and will not appear on Caller ID displays.
2.) Call Block takes precedence over Series Hunting.
3.) This feature must be applied to all members of a Hunt group.
Call Park
Call Park functions like Call
To “park” a call against your number:
Tell the person to whom you are speaking that you are going to put them on hold.
Press the switchhook (or the Tap/Flash/Recall/Link button, depending on your telephone set).
Press 
* 
1 
1 and listen for confirmation tone.
To retrieve a call you “parked” against your number:
Lift the handset and listen for dial tone.
Press 
* 
1 
3 and listen for confirmation tone.
Begin your conversation.
NOTES:
1.) If a parked call is not retrieved, the parking station will be recalled when idle. 2.) A station in the “call parked” condition cannot use the
34 | 35 |
