Assembly Step 5
Locate these parts:
Damper
Plate
Hardware: | HARDWARE BAG C |
1 Required | 1 Required | 1 Required |
1.Turn the smoker upright.
2.Set the damper plate on top of the cabinet and line it up with the corresponding “butterfly” holes. One of the tabs will seat inside one of the holes.
3.Insert a bolt from the top through the center hole.
4.From the bottom side, place a lock washer and nut
on the bolt as shown.
5.Thread the nut just tight enough to keep the damper plate
snug. It should be | Lock Washer | |
able to rotate with | Nut | |
little resistance. | ||
|
Tools needed:
Phillips Head
Screwdriver
3/8”
Wrench
Bolt
Damper
Cabinet Panel
10
