Assembly Step 3 - Attach Grill Bottom to Pillar

Tools Needed:

3/8”

wrench

7/16”

wrench

USE HARDWARE BAG B :

1/4-20 nut (4)

1/4-20 x 1”

bolt (4)

LOCATE THESE PARTS:

grill bottom

assembly (1)

heat

shield (1)

back side of grill

1.Working from the back (open) side of the pillar, set the heat shield on top of the pillar.

2.Set the grill bottom on top of the heat shield. Line up the burner tubes with the control valve orifices inside the pillar. Adjust the grill bottom and heat shield to line up the bolt holes.

3.Insert the bolts through the grill bottom and tighten the nuts from inside the pillar.

12

Page 12
Image 12
Vermont Casting 8000, 6000 Assembly Attach Grill Bottom to Pillar, Grill bottom Assembly Heat Shield Back side of grill