Assembly Step 3 - Continued
IMPORTANT: Make sure the control valve ends are properly seated inside the burner tubes as shown. (The control valve ends are attached to the pillar; the burner tubes are attached and extend through the grill bottom.)
Improper installation and connection of the burner tubes to the control valves is dangerous and may lead to damaging fire and personal injury.
This illustration shows a proper connection.
Venturi
Valve
4.Locate the two black igniter wires beneath the grill bottom.
Press the metal contacts of the loose ends of the wires onto the metal pins of the igniter unit. The position of the wires is not relevant - either wire may be connected to either prong. It is important that the wires are connected securely.
13
