Vermont Casting A052041 owner manual Assembly Instructions Attach the Pillar to Grill Bottom

Assembly Instructions • Attach the Pillar to Grill Bottom.

tools needed:

3⁄8" open-end wrench flat-blade screwdriver

Locate these parts:

top

back hinge strut

grill bottom

( 1 )

shown right-

collarside up assembly

top

front
control	pillar
knobs	( 1 )
	shown
	right-
	side up

Use hardware bag “B”:

1/4-20 x 3/4”

( 4 )

HINT: For the first portion of the assembly you will be assembling the grill bottom, pillar and base up- side-down.

1.Position the grill bottom casting upside down so that the heat collar assembly is upward.

2.Working from the back (open) side of the pillar, set the pillar upside down onto the collar assembly.

3.Locate the holes in the pillar bot- tom and align with holes in collar.

4.IMPORTANT:

Make sure the gas control valve ends are inside the burner ven- turi tubes extending through the grill bottom as shown. (See Adjacent Page)

5.Thread screws into holes and tight- en with a wrench / screwdriver.

12