Manuals / Vermont Casting / Kitchen Appliance / Ventilation Hood

Vermont Casting DVRS3, DVRSL, DVRSR installation instructions Vertical Through the Roof Installation

Models: DVRSL DVRSR DVRS3

1 35
Download 35 pages 49.36 Kb
Page 25
Image 25

VERTICAL THROUGH THE ROOF INSTALLATION

1.Locate your fireplace.

2.Plumb to centre of the (4") 90o transition elbow (7TDVRT90) from ceiling above and mark position.

3.Cut opening equal to 9-3/8" x 9-3/8" (240 mm x 240 mm).

4.Proceed to plumb for additional openings through the roof. In all cases, the opening must provide a minimum of 1 inch clearance to the vent pipe, i.e., the hole must be at least 9-3/8" x 9-3/8" (240 mm x 240 mm).

5.Place fireplace into position and secure to floor.

6.Place firestop(s) 7DVFS into position and secure. (Fig. 61)

7.Install roof support (Fig. 36) and roof flashing making sure upper flange of flashing is below the shingles. (Fig. 62)

8.Install appropriate pipe sections until above the flash- ing. (See Fig. 59 for #'s 7, 8 and 9).

9.Install storm collar and seal around the pipe.

10.Add additional vent lengths for proper height. (Fig. 62)

Attic

 

 

Insulation

 

 

Shield

11"

 

 

 

JOIST

 

 

Fig. 61

Ceiling

11"

UPPER FLOOR

Installation

 

 

 

 

 

JOIST

 

 

FIRESTOP

 

 

SPACER

 

 

NAILS (4)

Fig. 61 If there is a room above ceiling level, firestop spacer must be installed on both the bottom and the top side of the ceiling joists. If an attic is above ceiling level a 7DVAIS (Attic Insulation Shield) must be installed.

Fig. 62 The enlarged ends of the vent section always face downward.

Fig. 62

SHEETMETAL SCREWS (#5) —

3 PER JOINT

SEALANT

STORM

COLLAR

- 25 -

Page 24 Page 26
Page 25
Image 25
Vermont Casting DVRS3, DVRSL, DVRSR installation instructions Vertical Through the Roof Installation
Page 24 Page 26

DVRSL, DVRSR, DVRS3 specifications

Vermont Castings has been a trusted name in the manufacturing of high-quality wood and gas stoves and fireplaces for decades. Among their extensive lineup of gas-burning appliances, the DVRS3, DVRSR, and DVRSL models stand out for their impressive combination of efficiency, aesthetic appeal, and user-friendly features. These models exemplify Vermont Castings' commitment to craftsmanship, innovation, and environmental responsibility.

The DVRS3 is a powerful direct vent gas stove that offers cozy warmth to any living space. It features a large firebox capable of accommodating different log options and provides a maximum input of up to 30,000 BTUs. One key feature of the DVRS3 is its advanced heat exchange system, which enhances heat distribution and efficiency, ensuring that more of the heat generated is released into the room rather than lost through the chimney. Additionally, the stove is designed with a full-width cast iron door and large ceramic glass window, providing an unobstructed view of the flames for a captivating ambiance.

The DVRSR model brings similar qualities but with a more contemporary design. This direct vent stove is engineered to fit seamlessly into modern homes while delivering efficient heating. With a maximum output of up to 25,000 BTUs, it maintains an eco-friendly approach, having been certified for low emissions. The DVRSR also comes equipped with various customization options, including different finishes and decorative options, allowing homeowners to match their stove with their interior design.

For those looking for a space-saving alternative without sacrificing performance, the DVRSL model is ideal. This slim-profile direct vent gas stove is designed to fit in tighter spaces while still offering impressive heating capabilities. With a maximum BTU output of 30,000, the DVRSL is packed with features such as an easy-to-use electronic ignition and remote control capability, allowing users to adjust the flame height and temperature settings with ease.

Each of these models is equipped with Vermont Castings' signature technology that promotes safety, efficiency, and reliability. From built-in safety shut-off systems to durable materials that withstand the test of time, the DVRS3, DVRSR, and DVRSL models are designed to provide years of dependable service. Whether you value traditional aesthetics or modern design, Vermont Castings has engineered these gas stoves to meet the diverse needs of today’s homeowners, combining style, functionality, and peace of mind in each product.