Vermont Casting DVRSR, DVRSL, DVRS3 Installation of Logs, Lava Rock, Ember Material Placement

Models: DVRSL DVRSR DVRS3

1 35
Download 35 pages 49.36 Kb
Page 29
Image 29

INSTALLATION OF LOGS

Left and right side are defined using the manifold as reference. Facing the manifold,the left side is on your left and the right side is on your right.

1 . Remove left and right side glass. (See "Glass Re- moval" section)

2. Remove logs from packaging.

As with all plastic - these are not toys and should be kept away from children and infants.

3.Place main log manifold side (B18).

4.Place main log (B19).

5.Place left log manifold side (B20).

6.Place left log (B21).

7.Place right log manifold side (B22).

8.Place right log (B23).

9.Place crossover log (B24).

10.Place ember material on top of burners.

Top logs must be placed properly onto notches

 

B21

B24

B20

B18

B19

B23

 

B22

Fig. 68

 

LEFT SIDE VIEW

Fig. 69

 

 

RIGHT SIDE VIEW

Fig. 70

 

 

LAVA ROCK

The lava rock provided with this fireplace must be placed on the firebox base on either side of the burner assembly.

Under no circumstances should this lava rock be placed on any part of the burner assembly.

EMBER MATERIAL PLACEMENT

Separate the ember material into small pieces, roughly 1/2" in diameter and place onto the burner in front of the front logs. Do NOT pack down, leave in fluffy, loose conditionfor most realistic ember effect.

- 29 -

Page 29
Image 29
Vermont Casting DVRSR, DVRSL, DVRS3 installation instructions Installation of Logs, Lava Rock, Ember Material Placement