Manuals / Vermont Casting / Kitchen Appliance / Ventilation Hood

Vermont Casting DVRSR, DVRSL, DVRS3 installation instructions Options, FAN KIT FK24, Remote Control

Models: DVRSL DVRSR DVRS3

1 35
Download 35 pages 49.36 Kb
Page 35
Image 35

OPTIONS

FAN KIT - FK24

Fan Specifications: 120 Volt 60 HZ .75 Amp.

This fan does not need regular maintenance, however periodic cleaning is required. Check the area under the control door and in front of the fan and wipe or vacuum at least once a month during the operating season.

Should this fan require servicing, the power supply must be disconnected.

EB1

Fig. 75

The FK-24 comes with the electrical cord attached.

1.Slide fan assembly from the left side into fireplace opening, line up mounting holes with screw studs on rear of fireplace and fasten with #10-24 hex nuts.

2.Install thermal sensor on bottom of firebox using #10-24 hex nuts.

3.(Option A) - Place electronic fan speed control box on bottom of fireplace base, lining up mounting holes with screw studs. Fasten fan speed control box with #10-24 hex nuts.

(Option B) - The speed control can be installed in an electrical box at normal wall switch height for convenient access.

4.Remove electrical knockout on the left rear side of the fireplace. (See hard wire or receptacle hook up instructions).

5.Whether wiring directly to the fan junction box or into the EB1 (electrical receptacle box, P/N ZA1200), first ensure cable is secured using box connector.

THE FIREPLACE, WHEN INSTALLED MUST BE

ELECTRICALLY CONNECTED AND GROUNDED IN

ACCORDANCE WITH LOCAL CODES OR, IN THE

ABSENCE OF LOCAL CODES, WITH THE CURRENT

CSA C22.1 CANADIAN ELECTRICAL CODE or for

U.S.A. INSTALLATIONS, FOLLOW LOCAL CODES AND THE NATIONAL ELECTRICAL CODE, ANSI/NFPA NO. 70.

- 35 -

Any electrical re-wiring of this fan must be done by a qualified electrician.

Turn off all power before hook-up.

Wiring Instructions:

Hard (DIrect) Wire Hook-Up

First connect ground wire to ground stud located on the base of either box. Black wire from supply should connect to the variable speed switch. Alternate speed switch wire connects to temperature sensor. Alternate lead from sensor connects to fan. Alternate fan lead connects back to the white supply wire. (Fig. 76).

A:SPEED CONTROL

B:TEMPERATURE SENSOR

C:FAN

 

C

 

B

 

A

Black

Fig. 76

White

 

Ground

 

EB1 (Receptacle) Hook-Up

1.Remove 3/4" knock out. Slide the electrical box back plate into the lance clips on bracket on bottom of fireplace. Fasten into place with nuts provided. Fig. 77.

2.Connect the black positive wire to brass screw (polar- ized side) of the receptacle. The white wire is connected to the chrome screw. The ground wire is connected to the green ground screw of the receptacle. Fit the receptacle into the electrical box.

3.Screw the cover plate provided to the electrical box.

4.Plug in the FK24 Fan Kit.

NUTS

 

EB1

Fig. 77

REMOTE CONTROL

MRC1

-

On/Off Buttom Remote Control

MRC2

-

Temperature Control Remote

MRC3

- Temperature Control with digital display

 

 

and 24 hour programmable clock.

IMT

-

Wall mounted thermostat control

Page 34
Page 35
Image 35
Vermont Casting DVRSR, DVRSL, DVRS3 installation instructions Options, FAN KIT FK24, Remote Control
Page 34

DVRSL, DVRSR, DVRS3 specifications

Vermont Castings has been a trusted name in the manufacturing of high-quality wood and gas stoves and fireplaces for decades. Among their extensive lineup of gas-burning appliances, the DVRS3, DVRSR, and DVRSL models stand out for their impressive combination of efficiency, aesthetic appeal, and user-friendly features. These models exemplify Vermont Castings' commitment to craftsmanship, innovation, and environmental responsibility.

The DVRS3 is a powerful direct vent gas stove that offers cozy warmth to any living space. It features a large firebox capable of accommodating different log options and provides a maximum input of up to 30,000 BTUs. One key feature of the DVRS3 is its advanced heat exchange system, which enhances heat distribution and efficiency, ensuring that more of the heat generated is released into the room rather than lost through the chimney. Additionally, the stove is designed with a full-width cast iron door and large ceramic glass window, providing an unobstructed view of the flames for a captivating ambiance.

The DVRSR model brings similar qualities but with a more contemporary design. This direct vent stove is engineered to fit seamlessly into modern homes while delivering efficient heating. With a maximum output of up to 25,000 BTUs, it maintains an eco-friendly approach, having been certified for low emissions. The DVRSR also comes equipped with various customization options, including different finishes and decorative options, allowing homeowners to match their stove with their interior design.

For those looking for a space-saving alternative without sacrificing performance, the DVRSL model is ideal. This slim-profile direct vent gas stove is designed to fit in tighter spaces while still offering impressive heating capabilities. With a maximum BTU output of 30,000, the DVRSL is packed with features such as an easy-to-use electronic ignition and remote control capability, allowing users to adjust the flame height and temperature settings with ease.

Each of these models is equipped with Vermont Castings' signature technology that promotes safety, efficiency, and reliability. From built-in safety shut-off systems to durable materials that withstand the test of time, the DVRS3, DVRSR, and DVRSL models are designed to provide years of dependable service. Whether you value traditional aesthetics or modern design, Vermont Castings has engineered these gas stoves to meet the diverse needs of today’s homeowners, combining style, functionality, and peace of mind in each product.