Vermont Castings, Majestic Products LHE Natural Vent Insert

Lighting And Operating Instructions

FOR YOUR SAFETY READ BEFORE LIGHTING

WARNING:If you do not follow these instructions exactly, a fire or explosion

may result causing property damage, personal injury or loss of life.

A.This heater has a pilot which must be lit manu- ally. When lighting the pilot follow these instruc- tions exactly.

B.BEFORE LIGHTING smell all around the heater area for gas. Be sure to smell next to the floor because some gas is heavier than air and will settle on the floor.

WHAT TO DO IF YOU SMELL GAS

Do not try to light any fireplace

Do not touch any electric switch

Do not use any phone in your building

Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's

instructions.

If you cannot reach your gas supplier, call the Fire Department

C.Use only your hand to push in or turn the gas control knob. Never use tools. If the knob will not push in or turn by hand, do not try to repair it, call a qualified service technician. Applying force or any attempted repair may result in a fire or explosion.

D.Do not use this fireplace if any part has been under water. Immediately call a qualified service techni- cian to inspect the heater and to replace any part of the control system and any gas control which has been under water.

Lighting Instructions

1.STOP! Read the safety information above.

2.Turn off all electrical power to the fireplace.

3.For MN/MP/TN/TP appliances ONLY, go on to Step 4. For RN/RP appliances turn the On/Off switch to “OFF” position or set thermostat to lowest level.

4.Open control access panel.

5.Push in gas control knob slightly and turn

clockwise to "OFF".

 

 

 

 

PILOT

OFF

 

 

 

 

PILOT

 

 

1

 

 

t

 

F

 

 

 

 

 

 

o

 

 

ON

ON

P

 

 

F

 

 

F

l

 

 

 

 

 

i

 

2

 

 

 

O

 

O

 

 

F

 

 

 

 

 

5

 

3

 

FFO

 

4

 

 

 

 

 

 

 

 

Euro SIT

SIT NOVA

Honeywell

6.Wait five (5) minutes to clear out any gas. Then smell for gas, including near the floor. If you smell gas, STOP! Follow "B" in the safety information above. If you do not smell gas, go to the next step.

7.Remove glass door before lighting pilot. (See Glass Frame Removal section).

8.Visibly locate pilot by the main burner.

9.Turn knob on gas control counterclockwise

to "PILOT".

10.Push the control knob all the way in and hold. Immediately light the pilot by repeatedly depress- ing the piezo spark ignitor until a flame appears. Continue to hold the control knob in for about one

(1) minute after the pilot is lit. Release knob and it will pop back up. Pilot should remain lit. If it goes out, repeat steps 5 through 8.

3/8" - 1/2"

If knob does not pop up when released, stop and immediately call your service technician or gas supplier.

If after several tries, the pilot will not stay lit, turn the gas control knob to " " and call your service technician or gas supplier.

11.Replace glass door.

12.Turn gas control knob to “ON” position.

13.For RN/RP appliances turn the On/Off switch to “ON” position or set thermostat to desired setting.

14.Turn on all electrical power to the fireplace.

To Turn Off Gas To Heater

1.

Turn the On/Off switch to "OFF" position or set

3.

Open control access panel.

 

the thermostat to lowest setting.

4.

Push in gas control knob slightly and turn

2.

Turn off all electric power to the fireplace if

 

clockwise

to "OFF". Do not force.

 

service is to be performed.

5.

Close control access panel.

14

10005360

Page 14
Image 14
Vermont Casting LHEC20, LHEC30 installation instructions To Turn Off Gas To Heater, What to do if YOU Smell GAS

LHEC30, LHEC20 specifications

Vermont Casting has long been recognized for its commitment to quality and craftsmanship in the world of home heating appliances, and their LHEC30 and LHEC20 models exemplify this dedication. Both units are highly praised for their advanced features, efficient heating capabilities, and timeless design, making them popular choices for homeowners seeking warmth and comfort.

The LHEC30 is a powerful heater, showcasing a robust construction that utilizes cast iron, known for its excellent heat retention properties. This model is designed to deliver exceptional performance while maintaining an aesthetic appeal that blends seamlessly with traditional and modern décor. With a heating capacity of up to 3,000 square feet, the LHEC30 is perfect for larger spaces. It efficiently distributes heat through a radiant heat system, ensuring an even warmth throughout the room.

The LHEC20, on the other hand, is tailored for smaller spaces, with a heating capacity suitable for areas up to 1,600 square feet. Despite its smaller size, the LHEC20 does not compromise on performance. It offers many of the same advanced heating technologies found in its larger counterpart, making it a versatile option for various home sizes.

Both models feature Vermont Casting’s advanced combustion technologies, including secondary combustion, which significantly increases efficiency and reduces emissions. This feature ensures that the wood is burned more completely, resulting in less smoke and cleaner air. Additionally, an easy-to-use air control system allows users to adjust the burn rate according to their heating needs.

Another characteristic that sets these models apart is their decorative cast iron façade, available in multiple finishes to complement any interior style. The large glass doors provide a beautiful view of the flames, enhancing the cozy ambiance of any setting.

Vermont Casting’s LHEC30 and LHEC20 also prioritize user convenience with features such as easy access for cleaning and maintenance. The efficient design makes them not only functional but also a stylish focal point in any room.

With their blend of efficiency, elegance, and innovative technology, the LHEC30 and LHEC20 models by Vermont Casting stand out as excellent investments for homeowners looking to add both warmth and style to their living spaces. These heaters exemplify how practicality can meet aesthetics, making them a central part of any home heating solution.