Vermont Castings, Majestic Products LHE Natural Vent Insert

Installation & Operating Instructions

This gas appliance should be installed by a qualified installer in accordance with local building codes and with current CSA- B149.1 Installation codes for Gas Burning Appliances and Equipment.

FOR U.S. Installations follow local codes and/or the current National Fuel Gas Code ANSI Z223.1.

FOR SAFE INSTALLATION AND OPERATION OF YOUR GAS FIREPLACE PLEASE NOTE THE FOLLOWING:

1.This appliance gives off high temperatures and should be located out of high traffic areas and away from furniture and draperies.

2.Children and adults should be alerted to the hazards of the high surface temperatures of this appliance and should stay away to avoid burns or ignition of clothing.

3.Children should be carefully supervised when they are in the same room as your appliance.

4.Under no circumstances should this appliance be modified. Parts removed for servicing should be replaced prior to operating this appliance again.

5.Installation and any repairs to this appliance should be carried out by a qualified service person. A professional service person should be contacted to inspect this appli- ance annually. Make it a practice to have all of your gas appliances checked annually. More frequent cleaning may be required due to excess lint and dust from carpeting, bedding material, etc.

6.Control compartments, burners and air passages in this appliance should be kept clean and free of dust and lint. Make sure that the gas valve and pilot light are turned off before you attempt to clean this unit.

7.The venting system (chimney) of this appliance should be checked at least once a year and if needed your venting system should be cleaned.

8.Keep the area around your appliance clear of combustible materials, gasoline and other flammable vapor and liquids. This appliance should not be used as a drying rack for clothing, nor should Christmas stockings or decorations be hung in the area of it.

9.Under no circumstances should any solid fuels (wood, coal, paper or cardboard etc.) be used in this appliance.

10.Whether the zero clearance kit is installed directly on carpeting, vinyl tile or any combustible material other than wood, this heater must be installed on a metal or wood panel extending the full width and depth of the heater. The insert can not be installed directly onto or into combustibles.

IMPORTANT:

PLEASE READ THE FOLLOWING CAREFULLY

It is normal for fireplaces fabricated of steel to give off some expansion and/or contraction noises during the start up or cool down cycle. Similar noises are found with your furnace heat exchanger or car engine.

It is not unusual for your Vermont Castings, Majestic Products gas fireplace to give off some odor the first time it is burned. This is due to the curing of the paint and any undetected oil from the manufacturing process.

Please ensure that your room is well ventilated -

open all windows.

It is recommended that you burn your Vermont Castings, Majestic Products fireplace for at least ten

(10)hours the first time you use it. If optional fan kit has been installed, place fan in the "OFF" position during this time.

Locating Your Gas Fireplace Insert with

Zero Clearance Kit

X EAB

C

X D

X F

FP1249

Fig. 1 Locating unit with zero clearance kit.

A)

Flat on wall

B)

Cross corner

C)

Island

D)

*Room divider

E)

*Flat on wall corner

F)

Chase installation

NOTE: (Fig. 1)

*When you install your Vermont Castings, Majestic Products fireplace in (D) Room divider or (E) Flat on wall corner positions, a minimum of 6 (X) inches (153mm) clearance must be main- tained from the perpendicular wall and the outer edge of the trim.

This appliance may be installed in an aftermarket permanently located, manufactured (mobile) home, where not prohibited by local codes.

This appliance is only for use with the type of gas indicated on the rating plate.

Proposition 65 Warning: Fuels used in gas, woodburning or oil fired appliances, and the products of combustion of such fuels, contain chemicals known to the State of California to cause cancer, birth defects and other reproductive harm.

California Health & Safety Code Sec. 25249.6

Insert Applications

Before installing the gas fireplace insert, consideration must be given to the functioning needs of the fireplace. The size of the fireplace cavity (min. 25¹⁄₄"W x 17¹⁄₄"H x 13¹⁄₂" D for the LHEC20 and LHER20, 28³⁄₄"W x 21"H x 15¹⁄₂"D for LHEC30 ), the design of the chimney for effective venting should be determined. The availability of the gas supply as well as electricity for the insert fan must be confirmed.

Your Natural Vent Insert unit is designed to be vented vertically with a minimum height of 12 feet and a maximum vertical height of 35 feet.

10005360

3

Page 3
Image 3
Vermont Casting LHEC30 Installation & Operating Instructions, Locating Your Gas Fireplace Insert with Zero Clearance Kit

LHEC30, LHEC20 specifications

Vermont Casting has long been recognized for its commitment to quality and craftsmanship in the world of home heating appliances, and their LHEC30 and LHEC20 models exemplify this dedication. Both units are highly praised for their advanced features, efficient heating capabilities, and timeless design, making them popular choices for homeowners seeking warmth and comfort.

The LHEC30 is a powerful heater, showcasing a robust construction that utilizes cast iron, known for its excellent heat retention properties. This model is designed to deliver exceptional performance while maintaining an aesthetic appeal that blends seamlessly with traditional and modern décor. With a heating capacity of up to 3,000 square feet, the LHEC30 is perfect for larger spaces. It efficiently distributes heat through a radiant heat system, ensuring an even warmth throughout the room.

The LHEC20, on the other hand, is tailored for smaller spaces, with a heating capacity suitable for areas up to 1,600 square feet. Despite its smaller size, the LHEC20 does not compromise on performance. It offers many of the same advanced heating technologies found in its larger counterpart, making it a versatile option for various home sizes.

Both models feature Vermont Casting’s advanced combustion technologies, including secondary combustion, which significantly increases efficiency and reduces emissions. This feature ensures that the wood is burned more completely, resulting in less smoke and cleaner air. Additionally, an easy-to-use air control system allows users to adjust the burn rate according to their heating needs.

Another characteristic that sets these models apart is their decorative cast iron façade, available in multiple finishes to complement any interior style. The large glass doors provide a beautiful view of the flames, enhancing the cozy ambiance of any setting.

Vermont Casting’s LHEC30 and LHEC20 also prioritize user convenience with features such as easy access for cleaning and maintenance. The efficient design makes them not only functional but also a stylish focal point in any room.

With their blend of efficiency, elegance, and innovative technology, the LHEC30 and LHEC20 models by Vermont Casting stand out as excellent investments for homeowners looking to add both warmth and style to their living spaces. These heaters exemplify how practicality can meet aesthetics, making them a central part of any home heating solution.