Removal and Replacement Procedures
3.Make note of which wireless antenna cable is attached to which terminal on the Mini Card module, then disconnect the auxiliary and main antenna cables 1 from the Mini Card module.
4.Flex the Mini Card release tab 2 forward to release the Mini Card module. (The edge of the module opposite the socket rises away from the computer.)
5.Remove the Mini Card module by pulling the module away from the socket at an angle 3.
✎Mini Card modules are designed with a notch 4 to prevent incorrect installation into the Mini Card module socket.
Removing a Mini Card Module
Reverse the above procedure to install a Mini Card module.
Maintenance and Service Guide |
