Removal and Replacement Procedures

24.Remove the Phillips PM2.0×4.0 screws 1 that secure the left and right wireless antenna transceivers to the display enclosure.

25.Release the retention tabs 2 built in to the display enclosure lining that secure the wireless antenna cables to the display enclosure.

26.Detach the wireless antenna transceivers 3 from the display enclosure.

27.Remove the wireless antenna transceivers and cables 4.

The wireless antenna transceivers and cables are available in the Wireless Antenna Kit, spare part number 407791-001.

Removing the Wireless Antenna Transceivers and Cables

Reverse the above procedure to reassemble and install the display assembly.

5–38

Maintenance and Service Guide

Page 128
Image 128
HP dv5100 manual Removing the Wireless Antenna Transceivers and Cables