Removal and Replacement Procedures

The display release hook arm and spring are available in the Display Hinge Kit, spare part number 407796-001.

17.If it is necessary to replace the display release hook arm, slide and hold the arm 1 to the right.

18.Slide the right side of the arm 2 forward until it clears the tab 3 on the display enclosure.

19.Lift the arm 4 out of the display enclosure.

20.Detach the display release hook arm spring 5 from the tab on the display enclosure.

21.Remove the display release hook arm.

Removing the Display Release Hook Arm

5–36

Maintenance and Service Guide

Page 126
Image 126
HP dv5100 manual Removing the Display Release Hook Arm