![](/images/new-backgrounds/1319265/319265279x1.webp)
Removal and Replacement Procedures
5.Remove the Phillips PM2.5×6.0 screw 1 that secures the display hinge support to the base enclosure.
6.Remove the display hinge support 2.
7.Remove the power connector 3 from the clip in the base enclosure.
8.Remove the power connector cable 4 from the clips in the base enclosure.
✎The display hinge support is included in the Bracket Kit, spare part number
Removing the Display Hinge Support and Power Connector
Maintenance and Service Guide |