HP dv5100 manual Removing the Fan/Heat Sink Assembly Screws, Part

Removal and Replacement Procedures

5.Remove the following screws:

1 One Phillips PM2.5×3.0 screw that secures the expansion port 2 bracket to the system board

2Two slotted SM1.5×9.0 screws on each side of the expansion port 2 that secure the expansion port 2 bracket to the system board

3Two Phillips PM3.0×6.0 screws on each side of the external monitor port that secure the fan/heat sink assembly to the system board

Removing the Fan/Heat Sink Assembly Screws, Part 1

5–60 Maintenance and Service Guide