![](/images/new-backgrounds/1319265/319265293x1.webp)
Removal and Replacement Procedures
2.Remove the Phillips PM2.5×6.0 screw 1 that secures the USB/audio board to the base enclosure.
3.Remove the USB/audio board 2 from the base enclosure.
4.Disconnect the USB/audio board cable 3 from the USB/audio board.
✎The USB/audio board cable is available in the Cable Kit, spare part number
Removing the USB/Audio Board
Reverse the above procedure to install the USB/audio board.
Maintenance and Service Guide |