3 Appliance Preparation

Note: Have the gas supply line installed in accordance

 

WARNING

with local building codes, if any. If not, follow ANSI 223.1.

 

Installation should be done by a qualified installer approved

 

Fire Risk

and/or licensed as required by the locality. (In the Common-

 

 

Explosion Risk

wealth of Massachusetts installation must be performed by

 

 

Verify inlet pressures.

a licensed plumber or gas fitter.)

 

 

• High pressure may cause overfire

 

 

 

 

 

 

condition.

A. Gas Supply Connection

• Low pressure may cause explosion.

Install regulator upstream of valve if line

Ensure fittings are of the appropriate size and type on the

pressure is greater than 1/2 psig.

gas line connection. If the tubing has to be cut to length be

 

sure to use the proper cutting and flaring tool. Also, be care-

 

ful not to crimp the tubing while bending. If the tubing be-

B. Convert to Left Side Gas Piping

comes crimped, do not use for installation.

 

 

• Remove the brass elbow from the right side.

Certified joint compound or Teflon tape must be used on all

• Remove the cap from the left side.

threaded male connections to ensure a tight seal.

 

Note: Prior to installing the fittings, use Teflon tape or joint

 

 

 

 

compound on the male threads.

 

 

 

WARNING

Gas Leak Risk

Support control when attaching pipe to prevent bending gas line.

WARNING

Fire Risk

Explosion Risk

Personal Injury Risk

An explosion could occur if a connection is made directly to an unregulated propane (LP) tank.

Note: An individual manual shutoff valve (not supplied) is required when installing this appliance. Check local codes for location of shut off valve.

Note: A listed (and Commonwealth of Massachusetts approved) 1/2 in. (13 mm) T-handle manual shut-off valve and flexible gas connector are connected to the 1/2 in. (13 mm) control valve inlet.

If substituting for these components, please consult local codes for compliance.

Replace the cap on the opposite end of the burner tube.

Install the brass elbow on the left side of the burner.

WARNING

Fire Risk

Explosion Risk

Gas build-up during line purge may ignite.

Purge should be performed by qualified technician.

Ensure adequate ventilation.

Ensure there are no ignition sources such as sparks or open flames.

20012914 7/05 Rev. 0

Page 7
Image 7
Vermont Casting MO18 Appliance Preparation, Gas Supply Connection, Convert to Left Side Gas Piping

MO18 specifications

The Vermont Casting MO18 is a prominent addition to the world of high-efficiency wood stoves, designed for those who appreciate both style and functionality. With its elegant design, the MO18 combines traditional aesthetics with modern innovation, making it a perfect centerpiece for any living space.

One of the standout features of the MO18 is its exceptional heating capacity. Rated for medium to large spaces, this wood stove can effortlessly heat areas of up to 1,600 square feet, ensuring that homes remain warm and cozy even during the coldest months. The efficient heat output is complemented by an impressive burn time, which means users can enjoy a prolonged warm atmosphere without the need for constant refueling.

The MO18 employs advanced combustion technology, which significantly enhances its efficiency. With a clean-burning system, it minimizes emissions, contributing to a more environmentally-friendly heating solution. This not only meets but often exceeds stringent EPA standards, making it a responsible choice for the eco-conscious consumer.

Safety features are paramount in the design of the MO18. It includes an integrated air wash system that keeps the glass door clean, providing an unobstructed view of the mesmerizing flames while ensuring that the fire operates at optimal efficiency. The stove is also equipped with a heat shield, protecting nearby surfaces and enhancing overall safety.

In terms of construction, the MO18 is built to last, featuring cast iron construction that provides durability and excellent heat retention. This material is not only resilient but also adds to the timeless charm of the stove, giving it an appealing rustic appearance. Additionally, the MO18 is available in a variety of finishes, allowing homeowners to select a look that complements their unique style.

For ultimate convenience, the Vermont Casting MO18 includes a powerful blower that helps circulate warm air throughout the room, enhancing comfort while maximizing heat distribution. This feature is particularly valuable in larger spaces, ensuring that every corner benefits from the cozy warmth generated by the stove.

In summary, the Vermont Casting MO18 wood stove stands out for its remarkable heating efficiency, environmental responsibility, and durable construction. With its blend of traditional design and modern technology, it not only serves as a reliable heating source but also as an aesthetic addition to any home. Whether you’re gathering with family on a chilly evening or enjoying a quiet moment by the fire, the MO18 promises to deliver warmth and comfort in style.