Grate and Log Placement
1.Place the Elevated Grate Steps onto the back of the Grate and attach the Fettel to front of Grate as shown in Figure 7.
2.Place the Grate over the Burner Pan so the front legs of the Grate are 1” behind the front edge of the Pan, as shown in Figure 8.
3.Place the larger bottom logs (longer log in back, shorter (2) in front) onto the grate, leaving as much space between themas possible. (Fig. 8) When burning, the flames should come up directly between these two logs.
4.Next, place the smaller top logs diagonally onto the bottom logs. The top logs can be arranged to achieve your desired flame pat- tern. Refer to Figures 9, 10, and 11 (R18CFL, R24CFL, and R30CRL). Be sure you leave as much open space between the logs as pos- sible to minimize flame impingement and sooting.
5.Open the bag of Lava Rock and spread the rocks onto the fireplace floor around the burner pan for decorative purposes. (Fig. 6)
Figure 7 | Grate Steps | |
| Grate | |
Fettel Cast | Grate | |
Clip | ||
Front Grate | ||
|
Figure 8 | Front (2) | Long |
| Shorter Logs | |
|
| Log |
1" |
| CFM130 |
R18CFL, R24CFL and R30CFL Log Sets
Figure 9 |
|
R18CFL Log Set | LG371 |
Figure 10 |
|
R24CFL Log Set | LG372 |
8 |
|
Figure 11 |
|
R30CFL Log Set | LG373 |
20003889