Assembly Procedures VCS501 Series | Vermont Casting instruction

Assembly Procedures

VCS501 Series

Tools Required: Knife or scissors, Phillips or Robertson (square head) screwdriver, 7/16” and 3/8” wrench or ratchet. The use of a manual screwdriver is strongly recommended. A power drill may cause damage to the unit.

CAUTION: This grill is intended ONLY to be used as a cart model, this grill cannot be built into an enclosure.

CAUTION: The assembly of this grill requires two (2) people.

WARNING: Some parts may have sharp edges; to avoid injury, wearing gloves during assembly, lifting or moving the grill is recommended. Protective eyewear and long sleeves are also strongly recommended.

30005436 3/11 Rev. 3 En

Image 1

Vermont Casting manual Assembly Procedures VCS501 Series

Contents

Assembly Procedures VCS501 Series Unpack Carton and Verify Contents Parts Required Install the Casters Figures 2 Attach Skirt Optional Grease Pan / Grease Cup Installation Kit Shelf Right Contents Kit Condiment Tray ContentsKit Shelf Left Contents Right Side Shelf Left Side Shelf Steps 4 & 5 Right & Left Side Shelf Assembly Parts Required Right Shelf Assembly Attach Right Shelf Assembly to Grill Parts Required Left Shelf Assembly Attach Left Shelf Assembly to Grill Spit Rod Storage Bracket Parts Required Left Side Right SideSpit Rod Storage Brackets Install the Ignitor Battery Attach Side Burner AssemblyInstall the Backlighting Batteries Cooking Tips Smoker Box Install the Internal Components Warming Rack Cooking Grates Install the LP Cylinder LP Models only Install the Natural Gas Hose Natural Gas NG Models only Cook Light #10-24 x 1/2 Screws 50000337 Figures 19, 20 Install Shelf Light VCS501 Series Assembly Mhsc