[SIDE SEL] key to select "P" (PTT Lock), "D" (Dial-

Knob-Lock), "K" (Keypad Lock), or various combi-

nations of these. Rotate the CH selector knob to save

the new setting, then press the PTT switch to exit

the Set (Menu) mode.

No.7 GROUP (Group Select)

This Menu item allows you to change Channel

Groups, in the event that a Soft Key has not been

designated for this purpose. After selecting this Menu, press the [TOP SEL] or [SIDE SEL] key to

select the Channel Group in which you wish to op-

erate. Rotate the CH selector knob to save the new

setting, then press the PTT switch to exit the Set

(Menu) mode.

No.8 SCAN (Scan Mode On/Off)

This Menu item allows you to start the scanner, in

the event that a Soft Key has not been designated

for this purpose.

After selecting this Menu item, press the [TOP SEL] or [SIDE SEL] key to start ("SCAN ON") or stop

("SCAN OFF") the scanner. Rotate the CH selector

knob to save the new setting, then press the PTT

switch to exit the Set (Menu) mode.

No.9 DW (Dual Watch On/Off)

This Menu item allows you to activate the Dual Watch feature, in the event that a Soft Key has not

been designated for this purpose.

After selecting this Menu item, press the [TOP SEL] or [SIDE SEL] key to enable ("DW ON") or disable

("DW OFF") the Dual Watch feature. Rotate the CH

selector knob to save the new setting, then press the

PTT switch to exit the Set (Menu) mode.

No.10 TA (Talk Around)

This Menu Item allows you to activate the Talk Around feature, in the event that a Soft Key has not

been designated for this purpose. Talk-Around al-

lows direct simplex communications between por-

tables and/or mobiles, utilizing the repeater's down-

link frequency.

After selecting this Menu item, press the [TOP SEL] or [SIDE SEL] key to enable ("TA ON") or disable

("TA OFF") the Talk Around feature. Rotate the CH

selector knob to save the new setting, then press the

PTT switch to exit the Set (Menu) mode.

Set (Menu) Mode Functions

No.11 ENCR (Encryption)

On channels where scrambling is used, an incorrect

setting of (or failure in) the encryption system at one

end of the communication path will make it impos-

sible to talk to the other station. To change the cur-

rent status of encryption on your radio, after selecting this item, press the [TOP SEL] or [SIDE SEL]

key to enable (ENCR EN) or disable (ENCR DI) en-

cryption. Rotate the CH selector knob to save the

new setting, then press the PTT switch to exit the

Set (Menu) mode.

Remember that disabling encryption will mean that

your transmissions are no longer secure.

Return to the encrypted mode as soon as possible, and do

not discuss any critical or confidential information while

in the non- encrypted mode of operation.

No.12 AF VR

This Menu item determines the audio volume level

when the top panel's VOL knob is set to its fully coun-

terclockwise position (but not into the click stop).

This permits the programming of a certain minimum

audio output level, in applications where the radio

should never go totally silent.

After selecting this item, press the [TOP SEL] or [SIDE SEL] key to select the desired (minimum)

volume level. Rotate the CH selector knob to save

the new setting, then press the PTT switch to exit

the Set (Menu) mode.

No.13 BP VR (Beep VR)

This Menu item determines the beep volume level.

After selecting this item, press the [TOP SEL] or [SIDE SEL] key to select the desired level. Rotate

the CH selector knob to save the new setting, then

press the PTT switch to exit the Set (Menu) mode.

11