OPERATION
q Place a record on the slip mat.
w Switch on the unit using the Power on/off switch located on the rear panel.
e Remove the stylus protector if applicable.
r Start the platter spinning with the START/STOP button.
t Position the tone arm over the record and gently lower to begin playback.
y Set the playing speed to either 33 1/3 or 45 RPM.
When turned on this unit is set to play at 33 1/3 RPM. To adjust to a 45RPM speed setting, press the 45 RPM button. This unit does not use a cue lever system for speed setting(s).
u Move the tone arm to the resting position and secure using the tone arm clamp.
i Push the START/STOP button to stop the platter from spinning.
o Turn the unit off.
If the power switch is turned off without pressing the START/STOP button, the electric brake will not function.
Remote Control
The START/STOP functions of the
Playing EP records
Fit the EP adapter over the center spindle and follow the same playing instructions as written above.
Stylus light (Detachable mini light)
A detachable stylus light is available for this unit.
10
