Manuals / Victorinox / Fitness & Sports / Watch

Victorinox CHRONOGRAPHS Watch operating instructions Watch is wet

Models: CHRONOGRAPHS Watch

1 66

Download 66 pages 39.78 Kb

Page 9

SETTING THE DATE AND TIME (CHRONO TYPE II)

A.Pull out crown to position (2). Turn the crown away from you and the quick-set feature will rapid-advance the hour hand. As the hour hand passes midnight it will also advance the calendar. Continue to turn the crown away from you until the date showing is the day before the desired setting.

B.Pull out the crown to position (3). The seconds subdial hand will stop. Turn the crown away from you. When midnight is reached, the date will advance to the desired date. Continue to turn the crown until the desired time is set. Remember, the date advances at 12:00 midnight, not 12:00 noon.

C.After setting, push in the crown then press and screw down away from you until it is sealed tightly into position (1). The date and time are now set.

To Set Time Alone

Release the crown and then follow instructions “B”.

NOTE: You must always push in and screw down the crown to form a water resistant seal with the case. Never operate the crown when the

watch is wet.

- 8 -

Image 9

Victorinox CHRONOGRAPHS Watch operating instructions Watch is wet

Contents

Basic Operating Instructions Chronographs Accessories Quality Features T E R R E S I S T a N C E Water Resistance ChartThree Hand Analog Quartz Setting the Date & Time Pull Out CrownSetting the Date & Time Screw Down Crown Chronograph Operating Analog ChronographsSetting the Date and Time Chrono Type Chrono Type II Watch is wet Setting the Date Quick Mode Setting the Date and Time Chrono Type IIISetting the Date and Time Measurement of Elapsed Times Chronograph Functions Chrono Type I +Measurement of Lap Times Measurement of Intermediate Split TimesChronograph Subdials Measurement of Intermediate Split Times Measurement of Two Times at Very Short Intervals Chrono Type Chronograph Functions Chrono Type III +Chronograph Accumulated Timing Basic Function Elapsed TimeMeasurement of Intermediate Split Times Chrono Type Chronograph Operating Procedure Measurement of Elapsed Times Page Zero Reset of the Seconds Counter Hand Zero Reset of the Minutes Counter HandZero Reset of the Tenths of a Second Counter Hand Reinitializing the Chronograph Hands SUB-DIALSZero Reset of the Minutes Counter Hand Zero Reset of the Center Stop Second Zero Reset of the Hour Counter positionZero Reset of the Minute Counter Hand position Return the crown to position Zero Reset of the 1/10th Second Counter Zero Reset of the Minute Counter HandDigital Display ANALOG/DIGITAL ChronographsAnalog Display Adjusting the Digital DATE, MONTH, DAYAdjusting the Digital DATE, MONTH, DAY cont’d Adjusting the Second Time Zone Adjusting the Alarm Using the Chronograph LAP Time Night Vision Lighting Functions Time and DatePage Light Function Manual Winding Mechanical Manual Wind WatchesTo Set Time Alone Winding Mechanical SELF-WINDING THREE-HAND WatchesSetting the Time Setting the Day/Date Automatic Chronographs Pushers Watch IndicationsChronograph Indications Tachymeter Chronograph FunctionsMeasurement of Partial Times Addition Function Upper Time upper crown Alliance Traveller Dual Time Zone Setting the Date & TimeSetting the Date & Time Lower Time lower crown Alarm Watches Setting the Alarm Setting the 2nd Time Zone Instructions for Using Your 2ND Time Zone WatchPage Ratchet Bezel Available on select models only Illuminating Dial Available on select models only Leash Watch PACK, POCKET, and POCKET/DESK Watches Pocket Watch Leash Watch con’tPocket/Desk Alarm POCKET/DESK AlarmTravel Alarm Setting the AlarmTravel Alarm con’t Dual Time Travel Alarm Setting the Second Time Zone Page THREE-YEAR Limited Warranty Important Consumer Information Name Address City State Zip Date of Purchase Purchased from THREE-YEAR Limited Warranty Repair CouponSwiss Army BRANDS, INC