Power Connection

Be sure to use the correct supplied power cords depending on the power outlet to be connected. Con- nect the AC inlet of the projector firmly to the power outlet with the power cord.

CAUTION

Power

• Be careful when you handle the power cord.

outlet

• Firmly connect the power cord. Do not use a loosened

 

or unsafe power outlet or a malfunctioning contact.

 

Example of system setup

Power cord

Display

Monitor

DVD Player

S-Video Tape

Recorder

AC inlet

Computer (notebook)

Speaker with

Computer (desktop)

amplifier

 

NOTE: When connecting the projector to a notebook computer, set it so as to activate the RGB external image output (setting it to CRT display or to simultaneous LCD and CRT display). For more information, refer to the instruction manual of the notebook computer.

Plug & Play

This projector is compatible with VESA DDC 1/2B. Plug & Play is possible by connecting to a com- puter that is compatible with VESA DDC (Display Data Channel).

Use this function by connecting the accessory RGB cable with RGB IN 1 terminal (DDC 1/2B com- patible). Plug & Play may not operate by any other connection.

NOTE:

Plug & Play is a system configured with peripheral equipment which includes a computer, display and an operating system.

This projector is recognized as a Plug & Play monitor. Use the standard display drivers.

Plug & Play may not function properly with the computer to be connected. Use the RGB IN 2 terminal if Plug & Play does not function correctly.

8 ViewSonic PJ750

Page 10
Image 10
ViewSonic 300 manual Power Connection, Example of system setup, Plug & Play