ViewSonic 300 manual Indicator Message

Indicator Message

The POWER indicator, LAMP indicator, and TEMP indicator are lit and blank as follows. Take the appropriate measures.

			Table 10: Indicator Message
POWER	LAMP	TEMP	Contents
indicator	indicator	indicator
Lit	Turns off	Turns off	The Standby mode has been set.
orange
Blinks	Turns off	Turns off	Warming up. Please wait.
green
Lit	Turns off	Turns off	ON. Normal operation possible.
green
Blinks	Turns off	Turns off	Cooling down. Please wait.
orange
			Cooling. Please wait.
Blinks red	-	-	The error has been detected. Take the appropriate measures
			when the POWER indicator stops blinking.
			Lamp is not lit.
			The interior of the equipment may be too hot. Switch power
Blinks/			OFF, wait 20 minutes until the equipment cools, and check
	Lit red	Turns off	whether the ventilation openings are blocked, whether the air
Lit red
			filter is dirty, or whether the ambient temperature exceeds 35
			°C. Switch power ON again. Replace the lamp if the same
			problem occurs.
			Lamp or lamp cover is not found, or hasn’t been fitted in
			correctly.
Blinks/	Blinks red	Turns off	Switch power OFF, and wait for 45 minutes until the equipment
Lit red			cools. Check fitting of the lamp and lamp cover, and switch
			power ON again. Contact your dealer if the same problem
			occurs again.
			The cooling fan is not operating.
Blinks/			Switch power OFF, and wait for 20 minutes until the equipment
	Turns off	Blinks red	cools. Check for foreign matters in the fan, and switch power
Lit red
			ON again. Contact your dealer if the same problem occurs
			again.
			The interior of the equipment is too hot.(*1)
			Switch power OFF, and wait for 20 minutes until the equipment
Blinks/			cools. Check whether the ventilation openings
	Turns off	Lit red	are blocked, whether the air filter is dirty, or whether the ambient
Lit red
			temperature exceeds 35 °C. Then switch power
			ON again. Contact your dealer if the same problem occurs
			again.
			The interior of the equipment is too cool.
Lit green	Blinks red	Blinks	Check whether the ambient temperature is below 0°C. Contact
		red	you dealer if the same problem occurs when the ambient
			temperature is 0~35 °C.

NOTE:

(*1) When the internal temperature becomes excessive power is switched OFF automatically for safety reasons, and the indicator is extinguished. Set the power switch to [O] and wait for 20 minutes until the equipment has cooled sufficiently.

ViewSonic PJ750 21