ViewSonic 300 manual Options Menu, selected on the menu. Select an item with the, and buttons, and

Options Menu

The following adjustments and settings are available when OPT. is
selected on the menu. Select an item with the			and buttons, and
start or stop the operation with the		and	buttons.
		Table 7: Options Menu
Item			Description
VOLUME	Reduce	Increase
MENU	Select Menu Background Color: Select with the			buttons.
COLOR
LANGUAGE	Select Menu Display Language: Select with the			buttons.
	Set AUTO OFF: Set 1-99 minutes with the			buttons. The system
	automatically enters the standby mode when a signal is not received for the set
AUTO OFF	time.
	Clear AUTO OFF: Select STOP (0 min.) with the			button. When STOP is
	selected the system does not enter the standby mode even if no signal is
	detected.
	SYNC ON G Valid: Select TURN ON with the			button.
	SYNC ON G Invalid: Select TURN OFF with the			button.
SYNC ON G	• May not be displayed correctly with some input signals when SYNC ON G is
	valid. In such cases, remove the signal connector so that no signal is received,
	set SYNC ON G to invalid, and reconnect the signal.
	Set / Clear WHISPER Mode: Press the			button. When WHISPER is
WHISPER	selected, the WHISPER mode is active. In the WHISPER mode, acoustic noise
	level from the unit is reduced, and brightness level on screen is a little lower.

ViewSonic PJ750 15