ViewSonic manual ViewSonic CD3200vii, PC Get-function command to LCD Monitor, Get Function

Table 4-1 outlines the Get-function command list that must be supported by the LCD Monitor

Table 4-1: PC Get-function command to LCD Monitor

Get Function	Command	Command	Response Range	Comments
	Code (ASCII)	Code (Hex)	(Three ASCII bytes)
Get-Contrast	a	61	000 ~ 100	Gets Contrast value
Get-Brightness	b	62	000 ~ 100	Gets Brightness value
Get-Sharpness	c	63	000 ~ 100	Gets Sharpness value
Get-Color	d	64	000 ~ 100	Gets Color value
Get-Tint	e	65	-50 ~ +50	Gets Tint value
Get-Volume	f	66	000 ~ 100	Gets Volume value
Get-Mute	g	67	000: OFF (unmuted)	Gets Mute ON/OFF status
			001: ON (muted)
Get-RCU	h	68	000: DISABLE	Gets RCU mode status
			001: ENABLE
			002: PASS THROUGH
Get-Key Pad	i	69	000: DISABLE	Gets Buttons ON/OFF status
			001: ENABLE
Get-Input select	j	6A	000: VGA	Gets Input select status
			001: DVI
			002: COMPOSITE1
			003: COMPOSITE2
			004: COMPONENT1
			005: COMPONENT2
			006: S-Video1
			007: S-Video2
			008: HDMI1
			009: HDMI2
			010: HDMI3
			011: HDMI4
			012: HDMI5
Reserved	k	6B		Reserved for future expansion
Get-Power status	l	6C	000: STBY	Gets the status of the HDTV power.
			001: ON	HDTV response:
				000 = HDTV is in standby
				001 = HDTV is ON
Get-On hours	m	6D	00000 ~ 99999	Get the ON hours of the HDTV. HDTV
				shall accumulate the ON hours in
				Flash memory. When it receives this
				command it will response with the ON
				hour value of 5 bytes.
Get-ACK	z	7A	000	This command is used to test the
				communication link.

ViewSonic CD3200vii

Downloaded From TV-Manual.com Manuals