N4 User Guide.book Page 4 Wednesday, March 5, 2003 10:07 AM
The Remote Control
Activate the Remote Control
The first time you use the remote control, activate the remote control by pulling the plastic tab out of the remote control.
CAUTIONS
•An explosion may occur if you use the wrong battery! Use only the type of battery recommended by the manufacturer
•Only use the specified 3V Lithium batteries
•Do not mix new and old batteries. This may result in cracking or leakage, which may pose a risk of fire or lead to personal injury
•Insert batteries according to (+) and
•Dispose of the battery in accordance with local laws and regulations
•Keep the battery away from children and pets
•When the remote control is not used for an extended period, remove the batteries.
Note: Replace the batteries if the operation of the remote control becomes irregular or weak
To change the battery
1.Push the tip of a ballpoint pen into the small pin hole on the back of the remote control as shown below and pull the cover off.
2.Place the 3 V Lithium battery in the battery compartment.
Pin hole
Back cover | Lithium battery |
|
4 |
|
| ViewSonic NextVision N4 |
|
|
|
|
|
|
|
|
|
|
|
|
