ViewSonic ND4200/ND5000 12
3In the DHCP field of the Network Configuration screen, tap the down arrow
for the pull-down menu and select Enabled to dynamically get network
parameters. Make sure there are values in the IP address, Mask, Gateway,
and DNS fields although DHCP assigns values to these fields automatically. If
you select Disabled, type valid network parameters in these fields.
4 If any changes were made to this screen, do the following:
• To enable the changes, click Apply
• To save the changes, click the Administration menu > click Save
Configuration > click Save.
Browser Configuration
The Browser Configuration screen allows you to make specific screen settings for
a specific URL that you chose. Click Management > Browser. The screen shown
below appears. Note: 1 millisecond = 1/1000th second.
1In the Macromedia Flash Transparency Source field, select one of the
options from the pull-down menu.
2In the Screen rotation angle (clockwise) field, select one from the pull-
down menu for the angle of rotation of the HTML content displayed on-screen.
This feature is useful when the NMP-500 is installed vertically.
3In the Browser Proxy field, select Enabled or Disabled from the pull-down
menu.