ViewSonic ND4200, ND5000 TAS Configuration

ViewSonic ND4200/ND5000 16

TAS Configuration

This screen works in conjunction with TAS. (TAS software can be purchased through

Tivella at www.tivella.com or through an authorized Tivella dealer/reseller.) Click

Management > TAS. The screen shown below appears.

1In the Timeout (sec) field, type the number of seconds for the NMP-500s to

access TAS.

2In the IP Address field is a valid DNS name automatically generated by TAS

when connected to a network but empty when used as a standalone.

3 If any changes were made to this screen, do the following:

• To enable the changes, click Apply

• To save the changes, click the Administration menu > click Save

Configuration > click Save.

Contents

Main Page Contents INTRODUCTION SETTING UP THE NETWORK DISPLAY MANAGEMENT ACTIONS ADMINISTRATION HELP APPENDIX INTRODUCTION Packaged Contents Optional Accessories Requirements Two Modes of Operation Standalone TAS Managed Two Modes of Communication Features Front View Page Page SETTING UP THE NETWORK DISPLAY 1. Connect to a Switch or Router Connect Multiple Network Displays (optional) Page Put Batteries in Remote Control 4. Login MANAGEMENT Startup URLs/Network Configuration Browser Configuration Page VNC client Video/Audio Configuration TAS Configuration System Services Configuration Page ACTIONS Video Multicast Page Playlist To create a playlist Page Transparency Page ADMINISTRATION Advanced Video Configuration Security Page Page Page Page Page Page Help Customer Support You need the product serial number when you contact Customer Support. FCC Information Specifications ND4200 ND5000 LIMITED WARRANTY