ViewSonic ND4200, ND5000 - page 17

ViewSonic ND4200/ND5000 13
4In the Browser Proxy IP field, type an IP address if the Browser Proxy was
Enabled.
5In the Browser Proxy PORT field, type the port if the Browser Proxy was
Enabled.
6In the Default transparency between OSD and video layer field, type a
number that is between 0 to 255: (128 is average where video and graphics
blend together). Also, see examples in the Transparency section of this guide.
• 0 = video only, no graphics
• 255 = graphics only, no video
7In the Start screen display time field, type the number of milliseconds you
want the initial screen to be displayed at startup. (1 millisecond = 1/1000
second)
8In the Screen Height field, type the height of the screen that is displaying your
graphics image.
9In the Screen Width field, type the width of the screen that is displaying your
graphics image.
10 If any changes were made to this screen, do the following:
• To enable the changes, click Apply
• To save the changes, click the Administration menu > click Save
Configuration > click Save.