Powering On/Off the Projector
Powering On the Projector
1.Remove the lens cap. n
2.Ensure that the power cord and signal cable are securely connected. The Power LED will turn Orange.
3.Turn on the lamp by pressing “Power/Standby” button on the control panel. o
The startup screen will display for 10 seconds and the Power LED will turn green.
4.Turn on your source (computer, notebook, video player, etc.). The projector will detect your source automatically.
If you connect multiple sources at the same time, use the “Source” button on the control panel or remote control to switch.
2
Power/Standby
Turn on the projector first and then the signal sources.
1 Lens Cap
ViewSonic PJ256D | 11 |
