ViewSonic PJ400 manual Operating, Adjusting the volume, Temporarily muting the sound, Video Övideo

Operating

Adjusting the volume

1. Press the VOLUME button on the remote control. A dialog will appear on the screen to aid you in adjusting the

volume.

2. Use the cursor buttons / to adjust the volume.

To close the dialog and complete the operation, press the VOLUME button again. Even if you don’t do anything, the dialog will automatically disappear after a few seconds.

Temporarily muting the sound

1. Press the MUTE button on the remote control.

A dialog will appear on the screen indicating that you have muted the sound.

To restore the sound, press the MUTE button or VOLIME button.

Even if you don’t do anything, the dialog will automatically disappear after a few seconds.

Selecting an input signal

1. Press the INPUT button on the projector.

Each time you press the button, the projector switches its

input port as below.

RGB Ö S-VIDEO Ö VIDEO ×═════════════╝

1. Press the RGB button on the remote control to select the RGB port.

1.Press the VIDEO button on the remote control to select an input port for video signal.

Each time you press the button, the projector switches its video input port as below.

S-VIDEO ÖVIDEO

×═════╝

●When the TURN ON is selected to the item AUTO SEARCH of OPTION menu

( 38), the projector selects the S-VODEO port at first. If no input is detected at the

S-VIDEO port, projector will check the VIDEO port automatically.

ViewSonic PJ400 18